S Parameter Computation and Their Use for Electromagnetic Energy Wireless Transmission

  • Marilena Stanculescu University Politehnica of Bucharest , Splaiul Independentei nr. 313, sector 6, Bucuresti,
  • Mihai Iordache University Politehnica of Bucharest , Splaiul Independentei nr. 313, sector 6, Bucuresti
  • Dragos Niculae Niculae University Politehnica of Bucharest , Splaiul Independentei nr. 313, sector 6, Bucuresti
  • Lavinia Iordache University Politehnica of Bucharest , Splaiul Independentei nr. 313, sector 6, Bucuresti
  • Victor Bucata University Politehnica of Bucharest , Splaiul Independentei nr. 313, sector 6, Bucuresti
Keywords: linear electrical circuits, S parameters, electromagnetic energy wireless transfer, modified nodal analyses, Advances Design System, Ansoft Extractor Q3D

Abstract

This paper present the correct way of defining S parameters, based on linear electrical circuits, and the practical use of these parameters in obtaining efficient processes for transmitting the information and of the electromagnetic energy wireless transfer from emitter-receiver signal transmission point of view. Here are presented, also, two procedures for calculating these parameters, one based on modified nodal analyses, the second one based on state equations method. S parameters generation algorithm has the same structure for both computation procedures. The computation procedures for S parameters use the most advanced analogue circuit simulation programs, such as: Cadence, Advances Design System, Ansoft Extractor Q3D, Feko, ECAP, SYSEG etc. Finally, there are presented a few illustrative examples that certify the validity of the used computation procedures.

Published
2016-06-22
How to Cite
Stanculescu, M., Iordache, M., Niculae, D. N., Iordache, L., & Bucata, V. (2016). S Parameter Computation and Their Use for Electromagnetic Energy Wireless Transmission. INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY, 15(9), 7097-7109. https://doi.org/10.24297/ijct.v15i9.654
Section
Articles